Formwork vs Shuttering: Is There a Difference? (UK Guide)

In UK construction, formwork and shuttering usually mean the same thing: the temporary mould that holds wet concrete until it can stand on its own. Formwork is the broader term for all types and materials. Shuttering is the common site word, often meaning timber and plywood forms built on site.

Is there a real difference between formwork and shuttering?

For most practical purposes, no. On UK sites the two words are used interchangeably for the same job.

One UK glossary describes formwork as “shuttering, in most UK site usage” (Brilliant Ideas glossary). Wikipedia’s disambiguation page also lists the concrete sense of shuttering as UK usage (Wikipedia).

Where a difference is drawn, it is one of scope. Formwork covers every type of concrete mould. Shuttering tends to mean the timber and plywood kind built on site.

What does formwork mean?

Formwork is a temporary mould that holds wet concrete in shape. It carries the weight and pressure of the concrete until it is strong enough to stand on its own (Brilliant Ideas glossary).

Formwork can be made from many materials. Designing Buildings Wiki lists timber shuttering, steel, plywood and glass fibre reinforced plastics among them (Designing Buildings Wiki).

The same source says formwork must be strong enough for the loads it carries. It also says high quality workmanship and inspection are necessary.

What does shuttering mean?

Shuttering is the everyday site word for formwork. Designing Buildings Wiki calls it the most common type of formwork, built on site from timber and plywood.

It also notes that shuttering needs a special grade of plywood, because it must be water-resistant.

Because it is built by hand, shuttering is closely linked to carpentry. “Shuttering carpenter” is a common UK job title.

Formwork vs shuttering at a glance

Point Formwork Shuttering
Basic meaning Temporary mould for wet concrete Temporary mould for wet concrete
Scope Umbrella term for all types and materials Most common type: timber and plywood forms
Materials Timber, plywood, steel, GRP and others Timber and water-resistant plywood, built on site
Typical use Definitions, plans, engineering drawings, job duties UK site usage and trade job titles
Supports underneath Falsework (a separate term) Falsework (a separate term)

When do people use which term?

The two words overlap, but each has its usual home.

  • Site talk: “shuttering” and “shutters” are common in UK site usage.
  • Technical references: “formwork” is the umbrella term that covers every material and system.
  • Job adverts: UK roles are advertised under both names, sometimes in the same advert.

Job adverts show the overlap clearly. One advert on the government’s Find a Job service is titled Formwork Carpenter but asks for “Shuttering Carpenters” in its headline (Find a Job). A Shuttering Carpenter advert on Career Map lists setting up and dismantling formwork as a core duty (Career Map).

Examples on a UK site

These are typical ways the two words appear on a job. Each refers to the same kind of temporary mould.

  • “Get the shuttering up for the ground beams before the pour.” Here it means site-built timber forms.
  • “Formwork drawings for the core walls have been issued.” Here it means the designed system, whatever the material.
  • “Strike the shutters on the slab edge tomorrow.” Here it means removing the timber edge forms once the concrete can stand on its own.
  • “We need a quote for formwork accessories.” Here it means the ties, clamps and fixings used with the forms.

Where does falsework fit in?

Falsework is a different thing, and it is worth keeping separate. It is the temporary structure that holds the formwork up, such as props, frames, beams and their bases (Brilliant Ideas glossary).

In short, formwork or shuttering shapes the concrete. Falsework holds it up. For a fuller comparison, read our guide to formwork vs falsework.

HSE lists falsework for above-ground concrete pours as temporary works. It recommends appointing a temporary works coordinator. Most temporary works need a design with calculations, and more complex designs need an independent check. HSE lists BS 5975-1:2024 and BS 5975-2:2024 as related standards; part 2 covers falsework (HSE).

Which accessories hold shuttering together?

Whatever you call it, the form needs fixings to stay in line. The accessories are the same whichever word your team uses.

Buying for this job?

OM Private Ltd supplies formwork clamps (including Claw Head), Timber End Ties, Panel Hole Plugs, and all formwork accessories to sites across the UK.

Request a trade quoteCall +44 7452 889827

Trade prices on any quantity · UK-wide delivery · Quote requests 24/7

Frequently asked questions

Is shuttering the same as formwork?

In most UK site usage, yes. Both mean the temporary mould that holds wet concrete. Shuttering often refers to timber and plywood forms built on site.

Why do UK builders say shuttering?

Shuttering is the common UK site term for formwork. It is still used in conversation and in job titles such as shuttering carpenter.

Is a shuttering carpenter the same as a formwork carpenter?

In practice, usually yes. UK job adverts use both titles for the same work: setting up, installing and dismantling formwork.

Is falsework part of the shuttering?

No. Falsework is the temporary support that holds formwork or shuttering up, such as props and frames. Our formwork vs falsework guide explains the difference.

Need ties, clamps or fixings for your next pour? Browse our formwork accessories, add what you need to your quote list, and request a trade quote from OM Private Ltd.

Sources: Designing Buildings Wiki – Formwork; HSE – Temporary works; Brilliant Ideas – Formwork glossary; Wikipedia – Shuttering; DWP Find a Job – Formwork Carpenter; Career Map – Shuttering Carpenter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top