Formwork accessories are the small parts that hold a formwork system together: ties, clamps, connectors, feet, plugs and fixings. They keep panels aligned and tight while wet concrete is poured, then let the forms be struck cleanly once the concrete can carry itself. This guide explains what each type does and how to choose them.
What are formwork accessories?
Formwork is the temporary mould that shapes concrete. The panels and beams do the main work, but they rely on accessories to connect, align, brace and seal them. Without the right ties and clamps, a form can move or burst under the pressure of wet concrete.
The main types of formwork accessories
| Type | What it does | Example products |
|---|---|---|
| Ties and stop end ties | Hold a form face or stop end at the right distance so the wall or slab keeps its thickness | Timber End Tie |
| Clamps and connectors | Join panels, or fix to steel members, so the form stays aligned | Claw Head, Primary Beam Clamp, Profile Fixing Plate |
| Feet, bases and adjusters | Give struts and props a firm base and allow fine height or alignment adjustment | Strut Foot, Corner Ratchet, Slab Feet, Adjustable Slab Edge Attachment |
| Bolts and nuts | Make bolted connections between components | M16 x 50 Grade 8.8 Hex Bolts, M16 Hex Nuts |
| Plugs and tags | Blank off unused holes and label kit by job, location or inspection status | Panel Hole Plugs, Plastic Labelling Tags |
| Screws | Fix timber to formwork and shuttering | Yellow zinc wood screws |
Formwork accessories list
These are the accessories most formwork jobs use. Links go to the parts we supply.
- Tie bars and wing nuts: threaded bars that pass through the wall and hold the two form faces together, tightened with wing nuts and plates. See types of formwork ties.
- Tie sleeves and cones: plastic tubes and cones round the tie bar, so the bar can be pulled out after the pour.
- Stop end and snap ties: ties left in the concrete and snapped off afterwards, such as the Timber End Tie.
- Panel clamps and connectors: join and align panels, such as the Claw Head.
- Beam clamps: fix to steel flanges without drilling or welding, such as the Primary Beam Clamp.
- Struts, props and their feet: brace forms upright; a Strut Foot gives the strut a firm base.
- Adjusters and spindles: fine-tune level and alignment, such as the Corner Ratchet.
- Hole plugs: blank off unused tie holes, such as our Panel Hole Plugs.
- Bolts, nuts and fixing plates: bolted connections, such as M16 bolts, M16 nuts and the Profile Fixing Plate.
- Screws: fix timber to formwork, such as yellow zinc wood screws.
- Release agent: applied to the form face so concrete does not stick to it.
- Labelling tags: mark kit by job, location or inspection status, such as our pull-tight tags.
How to choose the right accessories
- Match the system. Many ties and connectors are made for a particular type of panel. Check the fit with your formwork system before you order.
- Follow the temporary works design. Formwork is temporary works. Load-bearing parts such as ties, props, struts and their bases should suit the design, not be swapped on site.
- Think about the finish. Stop end ties and hole plugs affect the edges and faces you see after striking.
- Count per panel. Work out ties, clamps and fixings per panel or bay, then add spares for losses on site.
Formwork accessories and UK temporary works rules
In the UK, BS 5975 is the UK code of practice for temporary works. Since February 2025 it is published in two parts: BS 5975-1:2024 (management procedures) and BS 5975-2:2024 (falsework design and implementation), succeeding BS 5975:2019. It sets out how temporary works should be managed on site, including roles such as the temporary works coordinator. If you are unsure whether an accessory suits a load-bearing use, check with whoever holds the temporary works design. For falsework roles and design checks, see what is falsework?
Related guides: types of formwork · formwork vs shuttering · formwork striking times · slab edge formwork
Buying for this job?
OM Private Ltd supplies formwork clamps (including Claw Head), Timber End Ties, Strut Feet, Panel Hole Plugs, and all formwork accessories to sites across the UK.
Request a trade quoteCall +44 7452 889827
Trade prices on any quantity · UK-wide delivery · Quote requests 24/7
Frequently asked questions
What is the difference between formwork and falsework?
Formwork is the mould that contains and shapes wet concrete. Falsework is the temporary structure that supports formwork, or a permanent structure, until it can support itself. Read more in our guide to formwork vs falsework.
Are formwork ties reusable?
It depends on the tie. Some ties stay cast in the concrete and the exposed part is snapped or cut off after the pour, so they are single use. Bolted tie systems with removable parts can often be reused. Check the description of the tie you are buying.
What is a stop end in formwork?
A stop end is the board or panel that closes off the edge of a pour, for example at a construction joint or the end of a wall. Stop end ties hold it in place at the correct thickness. See how to fix a stop end.
Where can I buy formwork accessories in the UK?
OM Private Ltd supplies formwork and falsework accessories to sites across the UK on a trade quote basis. Add products to your quote list or call +44 7452 889827.
Need parts for your next pour? Browse the range or request a quote.
